About this item

• Advantages  Rapid strength gain ,Vibration resistant,  Corrosion resistant ,Non expansive Can be placed under water
• Hole preparation and formation Optimum performance of Lokfix requires rough sided, dust free holes. Uses of rotary percussive drills with air or water flushing is recommended. Diamond drilled holes should be under-reamed unless necessary safety factors are incorporated. Cast holes should preferably be inverse dovetail configuration. If parallel sides holes are cast they should be rough to provide adequate keying.
• Bar preparation All bars should preferably be degreased and all flaky rust removed. Mixing A complete pack of resin and catalysed filler should be mixed in one operation. Mixing may be carried out mechanically. When a smooth, even consistency is achieved the grout is ready for use and should be placed well within the gel time of the grout ( See properties). Packs have been designed to produce practical and economic volumes of grout. Do not attempt to mix partial pack components.
• Installation Lokfix polyester resin grout S The grout should be poured steadily into the prepared holes. The anchor bar is then pressed into the hole to the required depth. Slight agitation of the bar will assist in achieving a complete bond. The bar should then be left undisturbed in the required position until the resin is set.